Tag Archives: Kill switch

Autodesk remotely killswitches AutoCAD licenses – again

6 Replies

Following the AutoCAD 2019 rollout disaster, where subscription users found their AutoCAD 2018s were broken by an Autodesk licensing system meltdown, Autodesk CEO Andrew Anagnost issued an apology. He also assured customers on Twitter that it wouldn’t happen again:

While I welcomed that, I did have this to say at the time:

I don’t think such a guarantee is realistic, given that the nature of subscription software is to only work when it knows you’ve paid up. At least it demonstrates that the desire is there right at the top to try to prevent such debacles from occurring in future.

Autodesk watchers know that words mean little and actions are everything. I look forward to Andrew sharing news of the actions he’ll be taking to make good on his promise.

Back to the present. Does it come as a surprise to anybody to discover that less than a month later, Autodesk has again accidentally remotely killswitched people’s licenses? Again, not just the new release, but 2018 too. As reported on Twitter and www.asti.com:

After a couple of exchanges, the always-responsive people on the @AutodeskHelp Twitter feed came back with this:

So it’s fixed, but CAD Managers now have a bunch of work to do at their end to deal with a problem created at the Autodesk end. Somebody screwed up, they fixed it, another apology is issued, stuff happens, life goes on.  That’s it for this month, probably. But it doesn’t address a very fundamental problem.

Let’s go back to basics.

The primary function of a licensing system is to allow use of the product by legitimate users.

Everything else is secondary. If a system relies on phoning home and getting the required response from a remote system before you’re permitted to use the software you paid for, not just after installation but on an ongoing basis, then it’s fundamentally flawed from the user’s point of view. Yet that is the system that Autodesk has chosen to base its business on.

No amount of sincere, deeply felt apologies or it’ll-never-happen-again promises will alter the fact that Autodesk has put its own convenience ahead of the ability of paying customers to use what they have paid for. Will Autodesk change that state of affairs? I very much doubt it, in which case it’s inevitable that this kind of thing will happen again, whatever anyone might promise.

AutoCAD 2019 rollout disaster

10 Replies

If you’re an AutoCAD user, you may have been intrigued by the news about the new way Autodesk is bundling up AutoCAD 2019 with various verticals (perpetual license owners need not apply). This is Autodesk’s latest attempt to promote its subscription model and raise prices again. 7% this time, but much more to come. But never mind that, the main point is that you’re getting a whole lot of stuff, and who could say that’s not a good thing?

So it’s most unfortunate for Autodesk that the AutoCAD 2019 rollout has been an unmitigated disaster.

My own experiences in trying to download the product were sub-optimal, but I later learned that I was one of the lucky ones. Subscription users not only had problems with AutoCAD 2019, they found their AutoCAD 2018s were broken too, victims of an Autodesk licensing system meltdown. That’s right, the AutoCAD 2019 launch acted as a remote kill-switch for people’s production software.

Perpetual license users were fine, of course. Only subscription customers suffered. There’s a lesson there that should not go unnoticed.

Back to my own experiences, to begin with I couldn’t download AutoCAD 2019 anywhere, despite it being having been announced everywhere some hours earlier. Autodesk Account wasn’t showing 2019, but it was showing this:

The usual workaround method of downloading the free trial wasn’t any better; that was still on 2018. I even tried installing the execrable Autodesk desktop app (temporarily!), but there was no sign of AutoCAD 2019 there either.

I’ve never had any success using Autodesk’s AVA bot for any real questions, but there was a time when it served as a gateway to Akamai-free downloads, so I tried that. Unfortunately, AVA has been “improved” and that once-excellent feature is gone. I did try asking AVA for the download link to AutoCAD 2019, but that didn’t go well.

First attempt:

Second attempt:

I mentioned my difficulties on Twitter and a few hours later the long-suffering but always-professional @AutodeskHelp people offered this:

Despite appearances, this actually turned out to be helpful because by then the product trial download had been fixed and was offering 2019 rather than 2018. I still didn’t see a direct link and against my better judgement tolerated a very temporary installation of Autodesk’s nasty Akamai download manager. About 5 minutes into the download it said it was going to take about 9 hours so I went away and left it. I returned within the hour to find it was finished, so I have no idea how long it actually took. After immediately uninstalling all traces of Akamai and Autodesk desktop app, I was able to start my evaluation.

So how’s the product? Pretty much the same as 2018, except with a better drawing compare tool. Oh, and the icons are better. The first command I ran in the new release reminded me that some things never change. The ancient rectangular pickbox bug popped in to see me, just like an old friend.

I’ve been warmed by the familiar, comforting experience of this and various other early 90s-era bugs and limitations, where the easiest workaround is to use a competitor’s product to do those bits. More on that in a future post.

An hour or so into using the product saw it crash and burn for the first time:

Don’t take my word for it, though; here are some comments from various users, CAD Managers and long-term Autodesk fans, most of whom had a worse time of it than I did. It’s not just AutoCAD; LT and Navisworks are definitely affected and there may be others. Comments here have been reproduced from various sources under fair use; names have been removed to protect the innocent.

I think it is safe to say that Autodesk are having a very bad day. Account and activation issues, subscription access issues, forum login issues, kudos and comments blocked to some users…

I installed the brand new @Navisworks Manage 2019 last night, and this morning I get the “Your trial has expired” !!!

I can safely say that ‘unimpressed’ is my status right now with the licencing idiocy going on. Not only can I not get the 2019 version, but my 2018 version has stopped working too.

Looks like all subscription (not maintenance or legacy) software is affected this way: logging in and out as well as workarounds posted are not working. Now this is a good reason to abandon Autodesk subscription model.

Good news: Autodesk began rollout of 2019 licenses! Bad news: It might break your 2018 licenses.

Hard to imagine this rollout going any worse.
[Autodesk]”Hold my beer….”

2.5 days without AutoCAD available. I just wish Autodesk would have told us so I could have gone on vacation. Instead, I will have to work thru the weekend to make up lost time.

I love Autodesk and their software, but they have just ditched an entire generation of Autodesk ‘rockstars’ and their subscription portal isn’t working. It really doesn’t look good, does it?

my 2018 is hosed on 3 devices

Unfortunately the situation has lasted for nearly 24 hours and no work done. Can we send the bill to Autodesk?

so I thought I’d try and activate LT
LOL

Although some parts of this are supposedly fixed, it’s not over yet. As I type this, people are still reporting problems and Autodesk is still offering apologies:

Even now, AVA is still completely in the dark about the current release of Autodesk’s traditional flagship product.

It’s great to see users helping each other, though. You may find this Autodesk Forum post by Travis Nave useful as an interim workaround. Also, in a marvellous continuation of McNeel’s free service to the AutoCAD (and BricsCAD) LISP community, DOSLib has been made available for AutoCAD 2019 even before many people were even able to get hold of the software it runs on. That’s what I call service!

All in all, this has not the best start to AutoCAD’s brave new world of oneness. How did it go for you?