Category Archives: AutoCAD 2013

Autodesk acquires Angry Birds developer Rovio (repost)

2 Replies

This post, originally published on 1 April 2012, brings back fond memories. That’s mainly because of this tweet from Carl Bass:

Autodesk announced today that it had welcomed Rovio Entertainment into the Autodesk fold. Following a US$2.6 billion acquisition, the publisher of mega hit video game Angry Birds is now Autodesk’s Mobile Entertainment division based in Espoo, Finland. “This is a tremendously exciting development for Autodesk going forward,” said Autodesk CEO Carl Bass. “Rovio is the world leader in mobile entertainment software,” he added, “so for Autodesk to have access to that market and that technology opens up a whole new world for us.”

Bass was effusive about the synergistic benefits of the merger and the benefits it will bring to the user interfaces of all Autodesk products. “When a kid starts playing Angry Birds, they don’t need to read a huge mass of documentation. Just show them a few cartoons and they’re away, instantly productive. This is the essence of the democratization of design; it’s not dumbing down, it’s funning up.” This potential ease of use is excellent news for AutoCAD users, because the documentation is now so terrible that it will be wonderful if we no longer have to try to use it.

Former Rovio CEO, Taikke Monniennren, now Autodesk Vice President in charge of Mobile Entertainment, is equally excited about the future. “We have already been given access to the Autodesk code base and my developers can see the potential there. By copying and pasting some code modules, we hope to be able to piece together the Angry Birds 3D Max Suite in a few short years,” said Monniennren. “The main challenge will be in keeping the download size manageable, but with a bit of luck we will be able to keep it down to just a few gigabytes.” In comparison, the original Angry Birds game was just over a megabyte.

“Do not underestimate the strategic importance of this announcement,” said Bass. “Although it may come as an unpleasant surprise to our competitors, our customers are well aware that this is the direction we have been moving for some time now.” This is true. Autodesk is doing whatever it can to appear young, hip, cool, trendy, mobile, social and just totally with it, man. It has been talking and sometimes acting big on Cloud and mobile computing for a while. Clearly, acquiring Visual Tao (now AutoCAD WS) was just the beginning.

Who would dare to call Autodesk antisocial? Autodesk videos are all over YouTube. On Twitter, many key Autodesk people tweet many times a day. The recent AutoCAD 2013 launch in San Francisco was done entirely via Facebook (which enhanced Autodesk’s green credentials by allowing a reduction in the number of press and bloggers flown in from around the world to only 120). The first thing a new AutoCAD 2013 user sees on installation is a Welcome screen that is largely dedicated to Autodesk pushing its app store and Facebook and Twitter pages. Because the Welcome screen phones home on each use, Autodesk can easily slip in new links to any other sites it wishes to promote. I expect your AutoCAD 2013 Welcome screen will sport Angry Birds gaming links within a few days. Angry Birds gaming plug-ins for AutoCAD and related products are likely to appear in the app store soon, but I expect we will have to wait for AutoCAD 2014 until the games become part of the core product.

Clearly for Autodesk, kids are the new adults. But is what spoiled teenagers do on their iPhones really a sound basis for the needs of professional CAD users in a corporate environment? How well does this concept work in practice? Bass answered that by showing a prototype user interface for AutoCAD that uses the new technology. He demonstrated it on a 48″ touch-screen, but it is believed that it will be at least partly functional using old-fashioned mouse-based technology.

Bass started by selecting a red bird from the Ribbon, which sported a snazzy new flouro theme. He dragged the bird down into the drawing area (which had a beautiful animated background with kittens, rainbows and unicorns; let’s hope that makes into production). While this was going on, the system was providing haptic feedback, with the screen vibrating and the bird squawking when dragged close enough to an existing object. By dropping the bird close to the end of a line, Bass was able to start drawing a line from exactly that point. He then drew back the bird and released it such that it was launched in the direction he wanted the line to go. As the bird shot forward, Bass touched it just as it crossed another line and it snapped on to the midpoint with a happy chirp. Perfect!

He then demonstrated other birds in action. To draw a polyline you use the yellow bird and touch it at each vertex as it flings itself along your desired path. To explode a block you use the black bird, triggering a loud explosion which I think will have to be toned down for office use. Ellipse? That white chicken thing that lays an egg. Multileader? The little grey one that splits up when you touch it. And so on. Bass already has his Finnish developers hard at work devising hundreds of new birds that cover most of AutoCAD’s key functionality. Some unimportant features, such as plotting and xrefs, are difficult to translate into birds and will be deprecated into command-line-only versions before being dropped completely in a future release.

The demonstration had to be curtailed after a few minutes when Bass’s arms became too tired for him to continue, but it provided an enticing view of a future where CAD is fun, fun, fun! Addicted users are productive users, according to Bass. “If you’ve ever seen kids playing Angry Birds, you know that they will happily sit there playing it all day every day without complaint. They don’t even stop to eat. The only time they take a break is when they’re forced to visit the bathroom. Even when they’re in there they will probably photograph themselves in the mirror and post it on Facebook. CAD Managers, don’t you wish you could tap that astronomical productivity resource?”

According to Bass, those managers will soon be able to do exactly that. His advice is, “Fire the old fuddy-duddy naysaying Luddites who are allergic to change and replace them with a bunch of kids off the streets. Give them Autodesk software they can’t resist using and they’ll soon be flinging pixels around like there’s no tomorrow. You’ll have an instant office full of the cheapest engineers you’ll ever find, and they’ll be begging you to take their work home with them. With the literally infinite anytime anywhere power of Autodesk 360, they’ll be able to do exactly that. In a few years, the kids in hoodies you see hanging around shopping malls won’t be waiting to snatch your bag, they’ll be leeching wi-fi so they can design your next car on their phones. And they’ll be doing it using Autodesk software.”

Bass refused to be drawn on leaked details about the upcoming iPod Shuffle version of AutoCAD or its supposed marketing slogan Shake to Design, though. “We have a very strict policy of never discussing our plans for future products,” he explained, “except when it suits us.”

The marketing gurus at Autodesk have written an independent productivity report that shows that AutoCAD with the new interface improves productivity by 632.7%. On Windows only, that is. This productivity phenomenon will not apply to AutoCAD for Mac, because there are no plans to provide the Angry Birds interface on OS X. Autodesk believes that this won’t concern Apple users, because Macs are shiny and look really nice.

The impressive productivity figure was generated by performing carefully selected tasks on AutoCAD 2013 using the prototype interface, when using the latest, fastest and most expensive hardware. This was then compared with completely different tasks performed using AutoCAD 1.4. On a twin-floppy IBM PC. With a 12″ monochrome monitor driven by CGA. But without an 8087. The resultant percentage was then multiplied by the number of years since Autodesk produced an AutoCAD feature that wasn’t half-baked on release.

In related news, Autodesk’s legal department has lodged applications to register the words ‘Angry’, ‘Birds’ and all images of feathered flying creatures as Autodesk trademarks. Cease-and-desist notices have already been sent to publishers of ornithologist guide books. Also in Autodesk’s legal sights is Disney Corporation, which clearly violates Autodesk’s intellectual property rights with its depiction of Donald Duck as not just a bird, but frequently as an angry one who goes around smashing things up.

The last word goes to Bass. “Look, the trend is irresistible, and those who can’t keep up will be left behind. Here at Autodesk we believe in freedom of choice. You can either choose to follow our vision of the future, or take to the streets with a cardboard sign and a chipped enamel mug. What could be more democratic than that?”

Let’s critique AutoCAD’s parametric constraints

63 Replies

One of the big-ticket features of AutoCAD 2010 was parametric constraints. This was old hat for many applications, even some based on AutoCAD like Mechanical Desktop. Parametrics and constraints already existed in vanilla AutoCAD in the guise of dynamic blocks, but this was the first time ordinary AutoCAD allowed ordinary AutoCAD objects to be constrained and linked to parametric dimensions.

Contraints mean that you can draw some objects and tell them that they are only allowed to behave in certain ways. For example, two lines have to remain parallel to each other. Parametrics mean that objects can be tied to special dimensions such that the dimensions drive the objects, not the other way round.

How good a job has Autodesk done with creating and improving this feature in AutoCAD? Has Autodesk done its usual trick of releasing a half-baked feature and then ignoring it to death? In one vital respect, the answer is a resounding yes. AutoCAD’s parametric constraints can only be applied to 2D objects. Draw a shape using a polyline, apply constraints and parameters, and adjust them to make things work properly and appear correctly. Now extrude the polyline to convert it to a 3D solid. Your carefully applied constraints and dimensions are instantly exterminated. This was a huge and obvious hole in the feature when it was introduced, but on the fourth iteration of this feature in AutoCAD 2013, that gaping hole remains resolutely unfilled. I guess Autodesk is keeping AutoCAD’s parametrics in this flattened state in order to protect Inventor from internal competition.

This 3D failing is very obvious, but I’m interested in more subtle aspects than that. As my experience with parametrics in other applications is limited, I’d like to encourage you to provide us all with the benefit of your knowledge. How does the AutoCAD 2013 implementation compare with that found in Inventor? Solidworks? Mechanical Desktop? How easy and efficient is it to use, in terms of creating usable parametric drawings and manipulating them? Is it logical and reliable? Are there any missing capabilities? The Devil is in the details, so has Autodesk overlooked any?

I’d also encourage less experienced users to comment. If you don’t want to enter a new field with your own drawing started from scratch, have a look at this sample drawing courtesy of Autodesk’s Dieter Schlaepfer. Here’s what Dieter has to say about it:

For your amusement, here’s a backyard deck that I whipped up a while back as a parametric design. It’s saved in R2010 format. After you turn on the geometric and dimensional constraints, open the Parameters Manager and try changing the value of Angle from 90 to 120, 130, and 140 degrees. Also, try changing the value of Tread from 18 (inches, sorry) to 16 or 20.

No question that this takes a bit of experience and it’s not for everyone.

If you prefer to embark on your own journey of discovery, here are some deliberately vague instructions. As always in AutoCAD, there are many ways of doing the same thing, but this will do to get you started:

  1. Draw a closed polyline describing an open L shape (let’s say it’s a metal plate). Make sure the corners are square, but you don’t have to make the sizes totally accurate.
  2. Use the AutoConstrain feature on the polyline.
  3. Perform a few grip edits on the constrained polyline so you can see what difference the constraints have made.
  4. Use Dimensional Constraints Aligned to dimension the plate in four key places: each overall plate width dimension and each of the leg width dimensions. Hint: press an initial Enter to use Object mode before selecting the object. When you are prompted for the dimension text, either press Enter if it’s was drawn accurately or enter the correct size if it wasn’t. The plate should change to the size you enter.
  5. If you want these dimensions to show up on plots, you will need to make sure their Constraint Form is set to Annotational. You can use the Properties palette to do this. You may also need to use DIMEDIT Home to put the dimension text in the usual place.
  6. Try using a few normal editing operations on the objects (e.g. STRETCH, COPY, ROTATE, TRIM, grip edit) to see how they react.
  7. Try modifying the objects by double-clicking on the dimensions and changing the values, then using Parameters Manager.

So, how was that? Easy? Difficult? Useful but awkward? Any areas where efficiency could be improved (e.g. too many clicks required for common operations)? Can you use this in your work or is there some problem lurking that appears to be a dealkiller?

Edit: Here’s a more complex example from Dieter: https://www.dropbox.com/s/n5hng961nj1dkzy/gasket1.dwg?m

AutoCAD Help suckage to continue – confirmed

5 Replies

In a recent post on Between the Lines, Shaan passed on the following response from the AutoCAD Team:

There has been some recent discussions about the built-in help system in AutoCAD 2013, both positive and some criticism.  As our longtime users know, AutoCAD help has been through many evolutions.

We are particularly proud of the new AutoCAD 2013 online learning environment we recently released (AutoCAD Online Help Mid-Year Updates.) This update addressed several user requested fixes and changes, and we will continue to take our direction from our user’s feedback.

We do recognize that the online learning environment may not be the solution for every user, so while we are focused on creating a rich and personalized online experience, we will continue to maintain our current basic offline experience.

(The emphasis is mine). This statement, although couched in marketingspeak, confirms what I’ve had to say on the subject. Here’s my translation into plain English:

AutoCAD 2013 Help sucked, the customers said so, the recent update improved matters somewhat for online users, but the awful old system stays in place for offline users. The offline system is in maintenance mode, and the experience will continue to remain basic (i.e. it will suck long-term).

There’s no mention of correcting this situation; it’s clearly a matter of policy rather than some unfortunate accident.

Today, I was using Autodesk Navisworks Manage 2013. As you might expect from an Autodesk product, it’s powerful but unstable. In addition to the lockups and crashes, it has various bugs and annoyances. In looking for a way of working around one of the annoyances, I delved into the Help system. Strangely enough, this product (much younger than AutoCAD) uses something that looks remarkably like an old-fashioned CHM-based Help system. It worked offline. It was quick. It had contents, search and index tabs, and they worked on a Windows 7 64-bit system. It had a hierarchical structure and a breadcrumb bar that helped me understand the context of what I was reading. Using it was, in short, a breath of fresh air.

Memo to Autodesk: if you’re going to try to make online Help look good by mangling offline help, you’re going to have to do this to all your products at once to make it remotely convincing.

I was wrong about AutoCAD 2013 Help, it still sucks

8 Replies

In my effusive welcome of AutoCAD 2013’s updated Help system, I wondered if I had been shocked into missing some glaring problem. Unfortunately, that’s exactly what happened. In my enthusiasm, I managed to totally miss the fact that the new system has not been introduced for offline users.

If you use the new system, there’s a link on the front page to the offline files. I got as far as downloading and installing what I thought was the offline version of the new system and discovered that it didn’t want to install because the old one was already installed. What I should have then done, and didn’t, was to uninstall the old and install the new, before running it in offline mode. I intended to get around to that to check the performance and responsiveness of the respective versions, but didn’t have the time right then. If I had done so, I would have noticed that my download, uninstall and reinstall would have been in vain, because the offline version pointed to by the new system is still the old version. My apologies to anybody who wasted their time because of what I originally wrote.

There are many legitimate reasons why Autodesk customers want or need to use their software, including the documentation, entirely in offline mode. For example, the users I manage can’t access the online Help system from AutoCAD because Autodesk writes its software in such a way as to fail in a secure proxy server environment (yes, this has been reported as a bug, repeatedly). So for my users and many others, it’s true to say that despite the best efforts of Dieter and his team, AutoCAD 2013’s Help still sucks.

Look at this from the point of view of such offline AutoCAD 2013 Help users. We pay large amounts of money for software and Subscription. No “entitled” 99-cent users here.  We’ve provided extensive feedback on the woeful system that was inflicted on us at release time. We’ve hung out for half a release cycle with no adequate stopgap, even though one could easily have been provided. A small team has finally wrought an outstanding improvement and deserves congratulations for doing so. The improved system is dangled in front of our faces, and then we discover that we’re not allowed to have it. Not for any plausible technical or resourcing reason, but because Autodesk simply doesn’t want us to have it. How are we supposed to feel about that?

That’s right. Autodesk has managed to snatch a crushing defeat from the jaws of what should have been a stunning victory. I guess I should have expected something like this; for Autodesk, the half-baked job is de rigeur. But this goes beyond the usual problem of countless features that would have been great if they had been finished. This isn’t a matter of a product team struggling to develop features adequately within an impossible timeframe imposed by the yearly release cycle. This is a matter of policy. Some Pointy Haired Boss at Autodesk has decided to deliberately disenfranchise a significant group of its paying customers, by refusing to make available something that already exists and could easily be provided. This adds insult to the injury of having to wait 6 months for a CHM stopgap that was clearly the right thing to do, but which never came.

Why? What on earth would lead anyone to even contemplate the possibility that this might be a good idea? Lack of resources? While I’m quite aware that individual parts of Autodesk have their own budgets and limited resources, I don’t buy that as an excuse for the organisation as a whole. A multi-billion-dollar corporation that pays its executives millions? One that just threw away $60M on a dud social media buyout? Crying poor over something that would have cost maybe a few thousand? Sure, sounds legit.

No, a lack of resources is not the reason. It’s a policy issue. “There’s no reason for it, it’s just policy.”  But why would such an anti-customer policy exist? Vision. Autodesk is currently led by a Cloudy Vision. It’s important to Autodesk that everything Cloudy looks good. It’s clearly not enough to actually make online stuff work well. For one thing, that’s obviously pretty difficult, judging from Autodesk’s offerings to date. No, anything that’s offline has to be made to work badly, so the comparison looks as favourable as it possibly can. That’s much easier to arrange.

That’s why there was no CHM solution on the release date, despite Autodesk having a set of unpaid volunteers ready to put the thing together. That’s why there was no CHM solution provided a week later, or a month later, or six months later. Don’t think that it wasn’t provided because of a lack of resources; that excuse is entirely specious. It wasn’t provided because it would have made the online version look bad in comparison. The online version already looked abysmal, but an offline CHM solution would have just made the comparison so ridiculously one-sided that nobody would have been in any doubt about what a terrible idea on-line Help was. The Cloudy Vision would have looked suspect at best, and we can’t have that, can we?

What Autodesk wants is for people to think “Cloud good, non-Cloud bad”. If the Cloud can’t be made good, then making non-Cloud bad will have to act as substitute. Loading the dice in this way might stand a chance of working if customers were as clueless as some Autodesk decision-makers, but most of us aren’t total idiots. We notice these things.

This is a line-in-the-sand issue. This is about Autodesk pushing its vision at the expense of customers. No news there then, but from my point of view, this is one step too far. This is the tipping point where the not-convinced-about-the-Cloud phase could well turn into a full-scale take-your-Cloud-and-shove-it customer revolt. Me? I’m quite prepared to hand out the pitchforks and torches.

Carl of Arc

Source images: Hermann Anton (public domain) / Carl Bass (creative commons)

Carl Bass, you need to pull your troops into line. Let them know that while your Vision is important, implementing it must never come at the expense of common sense. It must definitely, never, ever come at the expense of your customers’ needs.  Blindly following a Cloudy Vision didn’t end well for Joan of Arc, and it’s unlikely to end well for Autodesk either. Please remember the source of Autodesk’s income. Without customers, you are nothing. You are treating your customers badly, and worse, treating us as idiots. Please, give it up before we give you up.

The Hitchhiker’s Guide to AutoCAD explained

47 Replies

Following my comments on The Hitchhiker’s Guide to AutoCAD, Autodesk’s Dieter Schlapfer has sought to explain the reasoning behind it. Here’s what he has to say:

As mentioned previously, The Hitchhiker’s Guide to AutoCAD is designed for occasional AutoCAD users and those coming back from their initial training. These are people who just need a base level of knowledge in 2D AutoCAD to get things done, and who don’t necessarily want to become experts. To make future versions more effective, I really want to get some input on the 42 AutoCAD commands, and any descriptions or illustrations that are not clear. Especially valuable to me is feedback coming from occasional users.

Here’s some history. Believe it or not, the 42 commands came first! I kept flaunting this number, which was based on an internal AutoCAD overview class that I taught a while back, in response to people who complained about how hard it is to learn AutoCAD. Based on that interesting number, two of my colleagues made the connection to the Hitchhiker’s Guide to the Galaxy, the title of which was based on Ken Welch’s book, Hitchhiker’s Guide to Europe (I have the 1986 edition).

Creating a hitchhiker’s guide to AutoCAD was a terrific idea and the next thing I knew, I was writing it. Most of the 42 commands were no-brainer choices, but there were several that I knew would be controversial among experienced AutoCAD users. Based on internal feedback and CIP popularity, I made a number of revisions to my original list but I’m open to being persuaded to make additional changes.

My biggest challenge was handling scaling and layouts. As you know, there are four primary ways to annotate drawings. It was tough, but I ended up choosing the one that was easiest to learn, the trans-spatial method, while giving a nod to the others.

Again, I’m looking for feedback from relatively new and occasional users. Where exactly is the guide weak or confusing, including any illustrations? I already have some things that I definitely want to change moving forward, but if any of you find someone willing to try it out, or if you have strong opinions about something in the guide, please let me know either here or email me directly at dieters@youknowwho.com (for the bots).

AutoCAD 2013 Help shock – it no longer sucks

18 Replies

Some months ago, I gave Autodesk several damn good (and thoroughly well-deserved) thrashings over its hopelessly inadequate AutoCAD 2013 Help system. When Autodesk’s Dieter Schlaepfer responded and asked for feedback, he sure got it. There are 142 comments on that one post to date, most of them leaving nobody under any illusions about how short of the mark the new system was.

There is now an updated version of the AutoCAD 2013 Help system. It has been an interminably long time coming, a fact made far worse by Autodesk’s stubborn refusal to provide a CHM stopgap (which could have easily been done on the ship date with minimal resources if the will had been there), but at least an update is here now. Is it any good, though?

I’ve seen fit to give the online version of the updated system a few minutes of my time and I have to say that it’s now way, way better than it was before. In a remarkable turnaround from current standard Autodesk practice, it would appear that customer feedback has not just been listened to, but actually acted on. Honest! Search results make sense. Performance is generally way better than I expected from an online system. There are links to useful things like lists of commands. Things like forward/back mouse buttons work as expected. Various things I expected to suck, simply didn’t. Huh? What’s going on here?

It’s not all brilliant. There are occasional unexpected pauses, but not to excess. A Douglas Adams fan (Dieter?) is clearly responsible for The Hitchhiker’s Guide to AutoCAD. It’s fun, but I’m not convinced it’s particularly useful. The layout is confusing and the content has me somewhat baffled. Is DRAWORDER really one of the first things a beginner needs to know about AutoCAD? Or were there 41 things in someone’s list and that one was thrown in there to make the number up to 42?

That aside, this thing is looking good. Unlike the last effort, I don’t think it deserves Total Existence Failure. But does it just look good in comparison with what went before? Have I been so shocked by apparent adequacy that I have missed some glaring problem? You tell me. Please, give it a fair go and report back on what you think.

If you want to try the offline version, here it is. It’s not immediately obvious, but you’ll need to uninstall the old one first before the new one will install, don’t bother. It’s still the horrible old thing. See I was wrong about AutoCAD 2013 Help, it still sucks for what I think about that.

AutoCAD 2013 Service Pack 1 – Now you see it, now you don’t

22 Replies

Last week, Autodesk released Service Pack 1 for AutoCAD 2013, and then removed it a few days later.

Service Pack 1 for AutoCAD 2013 has been temporarily removed due to a newly discovered fatal error. The AutoCAD team is actively working on resolving this and a new service pack will be posted here as soon as it is available.

This is the sort of thing that Beta testing is supposed to prevent, but in this case it obviously didn’t. Somebody in a position of influence at Autodesk needs to investigate whether this is just a freak one-off, or if there is some systemic weakness within the Beta testing program.

One of the supposed benefits of Cloud software is that there are no updates for users to worry about. It’s all taken care of on the vendor’s server and you’re always using the most up to date version. OK, now fast forward five years and imagine how this scenario would have panned out if AutoCAD was a SaaS product.

You come in one morning to find your AutoCAD keeps crashing, or worse, corrupting your files. It keeps doing this for several days until Autodesk is convinced that the problem lies at its end and reverts the changes on its server while it works out how to fix it. In the meantime, there’s nothing you can do to keep your business running except use one of those old-fashioned copies of AutoCAD you have lying around the place. Except your Subscription agreement only allows you to go back 3 releases. Autodesk no longer supports the release you happen to have handy, and won’t allow the software to be activated. You don’t have a 30-day window because you once evaluated that release on your PC and your 30 days are well and truly gone. Oh, and the file format of the drawings you have been using lately has changed several times and the old release won’t open them anyway.

Why would anyone want to put their business in this position?

Edit: A couple of weeks later, Autodesk released AutoCAD 2013 Service Pack 1.1 to resolve the problem.

AutoCAD 2013 for Mac – the holes live on

20 Replies

A couple of years ago, I reported on the missing features in AutoCAD 2011 for Mac. While some generous souls were prepared to accept something half-baked as a first attempt, even that excuse doesn’t wash when it comes to a third iteration. So how well is Autodesk doing at filling those holes? Decide for yourself. Here’s an updated list of missing features in AutoCAD 2013 for Mac:

  • Quick Properties Palette
  • Layer State Manager
  • New Layer Notification
  • Various layer commands including LAYCUR, LAYDEL, LAYMRG, LAYWALK, and LAYVPI
  • Autocomplete doesn’t work entirely properly, including offering commands that don’t exist
  • Filter
  • Quick Select
  • DesignCenter
  • Tool Palettes
  • Navigation Bar
  • ShowMotion
  • Sheet Set Manager (but there is Project Manager)
  • Model Documentation Tools (but at least now there are object enablers)
  • Geographic Location
  • Table Style Editing
  • Hatch Creation Preview
  • Multiline Style Creation
  • Digitizer Integration
  • Change Space
  • Express Tools
  • Material Creation, Editing, and Mapping
  • Advanced Rendering Settings
  • Camera Creation
  • Walkthroughs, Flybys, and Animations
  • Point Cloud Support
  • DWF Underlays
  • DGN Underlays
  • Autodesk 360 Connectivity
  • Data Links
  • Data Extraction
  • Hyperlinks
  • Markup Set Manager
  • dbConnect Manager
  • eTransmit
  • WMF Import and Export
  • FBX Import and Export
  • Additional Model Import
  • Ribbon Customization
  • Right-click Menus, Keyboard Shortcuts, and Double-Click Customization
  • VisualLISP
  • .NET
  • VBA
  • DCL Dialogs
  • Action Recorder and Action Macros
  • Reference Manager (Standalone Application)
  • Dynamic Block Authoring
  • Custom Dictionaries
  • Password-protected Drawings
  • Digital Signatures
  • Workspaces
  • User Profiles
  • Migration Tools
  • CAD Standards Tools
  • CUI Import and Export

Many of these are big-ticket, dealbreaking items. No DCL? Still? Seriously? To these we can add a whole application, Inventor Fusion, which comes as part of the AutoCAD 2013 for Windows install set. (Edit: Inventor Fusion for Mac is available to download as a Technology Preview application from Autodesk Labs and from the Apple App Store). I don’t expect many Mac users will be heartbroken about the lack of a permanent Ribbon (although there are Ribbon-like things that come and go), but as Autodesk reckons it’s responsible for a 44% productivity boost, maybe they should be. Oh, and it isn’t supported and doesn’t work properly on the current release of OS X.

To be fair, it’s not all one-way traffic. Here’s the list of features that appear only in AutoCAD for Mac:

  • Content Palette
  • Coverflow Navigation
  • Multi-touch Gestures
  • Project Manager (instead of Sheet Set Manager)

Well, that’s all right, then.

We’re used to Autodesk’s unfortunate mastery of the long-term half-baked feature, but carrying on with a whole product this unfinished for three releases is more than a little embarrassing. Charging the same amount for it as real AutoCAD adds insult to injury. While I’m sure there are dozens of Mac users happy to be using anything with the AutoCAD name on it on the platform of their choice, this is not a sustainable state of affairs.

Autodesk really needs to make up its mind about this product before embarking on more Mac misadventures such as porting Revit and other products. Autodesk needs to either take AutoCAD for Mac seriously and finish it off to an acceptable standard, or kill it off as a bad idea. As there’s no sign of the former happening and Autodesk history is replete with examples of the latter, I wouldn’t suggest anybody gets too attached to running AutoCAD natively on OS X.

Source: Autodesk knowledgebase article TS15833488.

Should Autodesk provide a CHM version of its AutoCAD 2013 Help?

6 Replies

I’ve added a poll asking this question over on the right. I would like to see this done as soon as possible as a courtesy for those customers who find the current AutoCAD 2013 Help system inadequate. If you agree, vote Yes. If you disagree (for example, you think Autodesk should instead concentrate on improving the current system), vote No. If you wish to make a comment on this specific issue, feel free.

AutoCAD 2013 – An Autodesk Help writer responds

164 Replies

Following some email discussions, I am happy to present a response from a relevant Autodesk person to the posts and comments here about AutoCAD 2013’s Help.

Thanks for the opportunity to respond to your readers, Steve.

First, I want to assure you that we’re listening to your comments about AutoCAD 2013 Help. We are adding it to the valuable feedback we’ve already received from users who participated in our Beta program. I responded promptly to every comment from each Beta user and will now address a wider audience.

Here are some of the trends we’ve seen so far in the suggestions users are making about AutoCAD Help:

  • Additional navigation to supplement our Search function
  • Alphabetical listings of AutoCAD commands and system variables
  • Improved precision from the Search function
  • Access to information about new features

We are working right now on our update plans. We invite your additional comments about any other problems you’ve had so that we can have a broad view of your needs as we define the scope of our update.

I’m glad to say that Help updates will no longer have to wait until the next product release. I’d also like to emphasize that the software industry, Autodesk included, is trending toward online delivery of both software and documentation, and that these technology changes pose significant challenges to all of us.

We always appreciate your feedback and we take it seriously.

Thanks and best regards,

Dieter Schlaepfer
Principal Content Developer
Autodesk, Inc.

As Dieter suggests, please comment here with your problems and suggestions. Please be as brutally honest as you wish about Autodesk, its offerings and its future plans. However, I ask that you remain civil. I have ‘known’ Dieter on-line for about 20 years and can attest to his integrity, intelligence and intense desire to do the best job possible. He did indeed respond very fully and honestly to the comments made by myself and others during the Beta program and in our emails. He may very well be the best listener I’ve ever come across, in any context.

In short, Dieter’s one of the good guys and he’s doing a brave thing here. Let him know what you really think, but please don’t beat him up.

AutoCAD 2013 – Using Help in anger

3 Replies

Trying to be fair, I decided to put aside my initial hostility to the AutoCAD 2013 Help system and use it for real. I used it in a realistic situation, to find out how to work with something new or changed (model documentation) as I was working through it with my own example drawing. Try as I might to give it a fair go, I could only get so far before I got irritated. Using it in anger might not be an entirely appropriate phrase for it, but it’s not that far off. Using it in annoyance, perhaps? Here’s how it went.

I hit F1, wait for it to finish loading itself, click in the search box (because that’s not where the focus is to start with), type ‘model documentation’ and pick Search (because Enter doesn’t work). I then wait again, for about 10 seconds, even though I’ve configured it for offline use. Eventually, there is a huge mass of results displayed, almost all of which are totally (totally!) irrelevant to model documentation. Most of them are relevant only to ARX programmers dealing with completely unrelated matters.

If I use the “phrase” option rather than “and”, the list is much shorter and has a much higher proportion of results that have some relevance, but there are still completely pointless results. For example, the 4th result is About Performance Considerations (AutoLISP), which does not contain the phrase at all. It does contain the words ModelSpace and Document, but not together. It does not contain any information remotely related to model documentation. Didn’t Autodesk buy a search technology company a while back? If that company’s technology is in use here, then Autodesk bought a dud.

At least the top two results directly relate to what I need, so I’ll move on with those. They are Commands for Working With Model Documentation Drawing Views and About Model Documentation. The content of the former page is OK; it’s just a list of commands. There is some pointlessly wasted space at the top of the page that means I have to scroll down to see the bottom of the list, but other than that it serves as a useful reference. The latter page is also fine. It’s an executive summary of the feature with a few relevant pictures, followed by a decent set of links pointing to relevant pages that expand on the subject and explain how to do various tasks associated with it. Now I have overcome the inadequacies of Search and determined that useful Help content is all there, that’s all good then, isn’t it? Not really, I’m afraid.

If Help was being run from a real browser, I’d be able to keep both of those starting pages open with their useful links, then middle-click on each of them as needed to open each useful page in a new tab. However, Help isn’t being run like that. It’s being run from inside Autodesk’s pseudo-browser thing, which only allows one page at a time to be displayed. To be fair, this restriction also applies to the old CHM-based Help to some extent. However, the old CHM Help is split into multiple sections, and it is possible to have multiple CHMs each open in their own windows. For example, I can have the AutoCAD 2010 main Help and Developer Documentation open at the same time, something that’s very important for my productivity and which I would find extremely difficult to give up.

To work around the tabless nature of 2013 Help, I need to choose one particular page and stick to it. When I need another page, I need to navigate back up to one of the original links pages and then back down again. That would be bad enough if navigation within the pseudo-browser was good, but unfortunately it isn’t. Despite what looks like a breadcrumb feature at the top of the page, this is non-functional because of the lack of a hierarchical structure to the content. It just keeps taunting me by saying ‘Home’ and nothing else, pointlessly wasting a swathe of vertical space. There are back and forward buttons in that space, but the back and forward mouse buttons I can use everywhere else do nothing in this browser. You can use Alt+Left and Alt+Right to back and forward. Don’t go too far back, though! If you do, the Search panel goes blank and can’t be restored by going forward again, or by switching between Favorites and Search. To fix this, you can close and restart Help , or pick the Home button and wait about 6 seconds for it to get its act together and restore the Search panel. Then you’ll be at the home page, which may not be where you wanted to go back to.

All right, so I have chosen the single page I’m allowed to have open and I want to use the features it describes. This test PC only has a single 1280 x 1024 screen so there really isn’t room for both AutoCAD and Help at the same time, a situation that will be familiar to users of notebooks. I click on the AutoCAD drawing area behind the Help window, expecting AutoCAD to come to the top and to go behind it. Nothing happens, other than Help losing focus. Help stays on top, obscuring the drawing area. If I click the main AutoCAD taskbar button (this is in XP), that minimizes both Help and AutoCAD. Restoring AutoCAD also restores Help, so it still obscures the drawing area. The two windows are linked, and not in a good way for somebody with one screen. I guess some users will want Help to stay on top, but there are plenty of others who won’t, so what could Autodesk have done to keep everybody happy? Made it configurable, obviously.

Eventually I worked out that I could work on AutoCAD if I explicitly minimised the Help window, so away I went. I used the Commands for Working… page, then the VIEWBASE page to start my model documentation experiment. I then picked another link from the VIEWBASE page, the Drawing View Creation Ribbon Contextual Tab page. Having finished with that, I wanted to get back to the Commands for Working… page, so instead of picking multiple Back buttons (which as noted above is fraught with danger if you do it too often), I clicked on that result in the Search panel on the left. Did this take me back to the Commands for Working… page? No, it did not. It did nothing at all. To make it work I had to click another search result first, and only then the one I really wanted.

One saving grace is that I discovered that if I right-clicked on a link in Help, I could copy the URL and then paste it into a proper browser. This works both on and offline, and allowed me to work around many of the problems noted above. This kludge doesn’t work for search results, though, only for links in pages.

I’ve given AutoCAD 2013 Help a decent go, as much as the average reasonable person would before giving up. Maybe more so. I feel pretty comfortable about giving it what I consider a fair assessment. The content of the Help pages itself looks pretty good to me, at least for those pages I visited and the context in which I was using them. If you already know what command you’re supposed to be using, you just hit F1 from within that command to get at the page you want and you don’t need to go any further, you could well be satisfied. But if you’re using the system in any other way, there’s no getting away from it, it’s a crock. The content is not the problem, it’s the loss of structure to that content, and the browser thing being used to present that content. That loss of structure was A Bad Idea and the browser is a very poor effort. The system as a whole should not have been inflicted on customers.

As a courtesy, Autodesk should do what it did following the 2011 Help debacle and provide a CHM solution for customers to download. It should then go on providing a CHM solution indefinitely, until it can come up with something that is of comparable quality. People are already talking about making their own 2013 CHMs. Autodesk, please do the right thing and save them the bother; let us all know that you’re going to provide CHM as a workaround and get it to us as soon as you can. Don’t worry about losing face by admitting that the 2013 Help isn’t up to scratch. It’s too late for that; we’ve already noticed.

AutoCAD 2013 – Help improved in one area

2 Replies

There’s one important area in which AutoCAD 2013’s Help shines when compared with its immediate predecessors. If you’re a Visual LISP user, you’ll be pleased to know that if you select a function name in the editor (e.g. (vla-get-ActiveDocument)) and hit Ctrl+F1, this now takes you to the appropriate page in the ActiveX and VBA Reference, as it should. In AutoCAD 2011 you just got a cryptic message or a 404 error, depending on the context. In AutoCAD 2012, you were just taken to the front page of Help and expected to find it yourself. Props to Autodesk for fixing this problem.

As a bonus, the reference you’re taken to is still a CHM so it works nicely. The Search tab doesn’t work in Windows 7, but that applies to all CHM Help and it’s Microsoft’s fault, not Autodesk’s. The structured contents and index are fully functional, which makes the whole thing usable even without the search facility.

AutoCAD 2013 – Autodesk video tutorial for Help

1 Reply

Autodesk has produced a 2-minute video explaining the features of the new Help system in AutoCAD 2013 that I recently panned. As you might expect, it’s kind of upbeat and chirpy, but the fact that Autodesk feels the need to provide a tutorial on how to use Help says it all, really. Whatever, it may be useful to you, so here it is. It’s hosted on the Autodesk site, unlike many other Autodesk videos (and my own, to be fair), so those of you who have YouTube blocked at work may still be able to watch it.

If you’re having trouble watching the tutorial, don’t panic. I expect Autodesk will soon produce another tutorial explaining how to use the tutorial explaining how to use Help explaining how to use the product to actually do work.

Autodesk acquires Angry Birds developer Rovio

5 Replies

Autodesk announced today that it had welcomed Rovio Entertainment into the Autodesk fold. Following a US$2.6 billion acquisition, the publisher of mega hit video game Angry Birds is now Autodesk’s Mobile Entertainment division based in Espoo, Finland. “This is a tremendously exciting development for Autodesk going forward,” said Autodesk CEO Carl Bass. “Rovio is the world leader in mobile entertainment software,” he added, “so for Autodesk to have access to that market and that technology opens up a whole new world for us.”

Bass was effusive about the synergistic benefits of the merger and the benefits it will bring to the user interfaces of all Autodesk products. “When a kid starts playing Angry Birds, they don’t need to read a huge mass of documentation. Just show them a few cartoons and they’re away, instantly productive. This is the essence of the democratization of design; it’s not dumbing down, it’s funning up.” This potential ease of use is excellent news for AutoCAD users, because the documentation is now so terrible that it will be wonderful if we no longer have to try to use it.

Former Rovio CEO, Taikke Monniennren, now Autodesk Vice President in charge of Mobile Entertainment, is equally excited about the future. “We have already been given access to the Autodesk code base and my developers can see the potential there. By copying and pasting some code modules, we hope to be able to piece together the Angry Birds 3D Max Suite in a few short years,” said Monniennren. “The main challenge will be in keeping the download size manageable, but with a bit of luck we will be able to keep it down to just a few gigabytes.” In comparison, the original Angry Birds game was just over a megabyte.

“Do not underestimate the strategic importance of this announcement,” said Bass. “Although it may come as an unpleasant surprise to our competitors, our customers are well aware that this is the direction we have been moving for some time now.” This is true. Autodesk is doing whatever it can to appear young, hip, cool, trendy, mobile, social and just totally with it, man. It has been talking and sometimes acting big on Cloud and mobile computing for a while. Clearly, acquiring Visual Tao (now AutoCAD WS) was just the beginning.

Who would dare to call Autodesk antisocial? Autodesk videos are all over YouTube. On Twitter, many key Autodesk people tweet many times a day. The recent AutoCAD 2013 launch in San Francisco was done entirely via Facebook (which enhanced Autodesk’s green credentials by allowing a reduction in the number of press and bloggers flown in from around the world to only 120). The first thing a new AutoCAD 2013 user sees on installation is a Welcome screen that is largely dedicated to Autodesk pushing its app store and Facebook and Twitter pages. Because the Welcome screen phones home on each use, Autodesk can easily slip in new links to any other sites it wishes to promote. I expect your AutoCAD 2013 Welcome screen will sport Angry Birds gaming links within a few days. Angry Birds gaming plug-ins for AutoCAD and related products are likely to appear in the app store soon, but I expect we will have to wait for AutoCAD 2014 until the games become part of the core product.

Clearly for Autodesk, kids are the new adults. But is what spoiled teenagers do on their iPhones really a sound basis for the needs of professional CAD users in a corporate environment? How well does this concept work in practice? Bass answered that by showing a prototype user interface for AutoCAD that uses the new technology. He demonstrated it on a 48″ touch-screen, but it is believed that it will be at least partly functional using old-fashioned mouse-based technology.

Bass started by selecting a red bird from the Ribbon, which sported a snazzy new flouro theme. He dragged the bird down into the drawing area (which had a beautiful animated background with kittens, rainbows and unicorns; let’s hope that makes into production). While this was going on, the system was providing haptic feedback, with the screen vibrating and the bird squawking when dragged close enough to an existing object. By dropping the bird close to the end of a line, Bass was able to start drawing a line from exactly that point. He then drew back the bird and released it such that it was launched in the direction he wanted the line to go. As the bird shot forward, Bass touched it just as it crossed another line and it snapped on to the midpoint with a happy chirp. Perfect!

He then demonstrated other birds in action. To draw a polyline you use the yellow bird and touch it at each vertex as it flings itself along your desired path. To explode a block you use the black bird, triggering a loud explosion which I think will have to be toned down for office use. Ellipse? That white chicken thing that lays an egg. Multileader? The little grey one that splits up when you touch it. And so on. Bass already has his Finnish developers hard at work devising hundreds of new birds that cover most of AutoCAD’s key functionality. Some unimportant features, such as plotting and xrefs, are difficult to translate into birds and will be deprecated into command-line-only versions before being dropped completely in a future release.

The demonstration had to be curtailed after a few minutes when Bass’s arms became too tired for him to continue, but it provided an enticing view of a future where CAD is fun, fun, fun! Addicted users are productive users, according to Bass. “If you’ve ever seen kids playing Angry Birds, you know that they will happily sit there playing it all day every day without complaint. They don’t even stop to eat. The only time they take a break is when they’re forced to visit the bathroom. Even when they’re in there they will probably photograph themselves in the mirror and post it on Facebook. CAD Managers, don’t you wish you could tap that astronomical productivity resource?”

According to Bass, those managers will soon be able to do exactly that. His advice is, “Fire the old fuddy-duddy naysaying Luddites who are allergic to change and replace them with a bunch of kids off the streets. Give them Autodesk software they can’t resist using and they’ll soon be flinging pixels around like there’s no tomorrow. You’ll have an instant office full of the cheapest engineers you’ll ever find, and they’ll be begging you to take their work home with them. With the literally infinite anytime anywhere power of Autodesk 360, they’ll be able to do exactly that. In a few years, the kids in hoodies you see hanging around shopping malls won’t be waiting to snatch your bag, they’ll be leeching wi-fi so they can design your next car on their phones. And they’ll be doing it using Autodesk software.”

Bass refused to be drawn on leaked details about the upcoming iPod Shuffle version of AutoCAD or its supposed marketing slogan Shake to Design, though. “We have a very strict policy of never discussing our plans for future products,” he explained, “except when it suits us.”

The marketing gurus at Autodesk have written an independent productivity report that shows that AutoCAD with the new interface improves productivity by 632.7%. On Windows only, that is. This productivity phenomenon will not apply to AutoCAD for Mac, because there are no plans to provide the Angry Birds interface on OS X. Autodesk believes that this won’t concern Apple users, because Macs are shiny and look really nice.

The impressive productivity figure was generated by performing carefully selected tasks on AutoCAD 2013 using the prototype interface, when using the latest, fastest and most expensive hardware. This was then compared with completely different tasks performed using AutoCAD 1.4. On a twin-floppy IBM PC. With a 12″ monochrome monitor driven by CGA. But without an 8087. The resultant percentage was then multiplied by the number of years since Autodesk produced an AutoCAD feature that wasn’t half-baked on release.

In related news, Autodesk’s legal department has lodged applications to register the words ‘Angry’, ‘Birds’ and all images of feathered flying creatures as Autodesk trademarks. Cease-and-desist notices have already been sent to publishers of ornithologist guide books. Also in Autodesk’s legal sights is Disney Corporation, which clearly violates Autodesk’s intellectual property rights with its depiction of Donald Duck as not just a bird, but frequently as an angry one who goes around smashing things up.

The last word goes to Bass. “Look, the trend is irresistible, and those who can’t keep up will be left behind. Here at Autodesk we believe in freedom of choice. You can either choose to follow our vision of the future, or take to the streets with a cardboard sign and a chipped enamel mug. What could be more democratic than that?”

AutoCAD 2013 – Autodesk pulls off a miracle with Help

27 Replies

In AutoCAD 2011, Autodesk introduced on-line Help. It was badly done and poorly received. It was slow and generally awful to use, and so obviously inferior to the generally well-crafted old CHM-based system in so many ways, that there were squeals of joy when somebody discovered that one of the AutoCAD-based vertical products hadn’t been updated to the new regime and still provided a CHM file. That file became hot property, being posted by users on Autodesk’s own discussion groups and other places. Eventually, the outcry was loud enough that Autodesk was forced to make the CHM version of Help available for download. Those of us who actually use the documentation from time to time (or support people who do) breathed a sigh of relief and got on with our work, grateful that Autodesk had seen the error of its ways. But had it, really?

No. In AutoCAD 2012, Help was not only online, but integrated with AutoCAD Exchange in Autodesk’s dodgy version of a pseudo-browser. How good is Autodesk at writing browsers? About as good as you’d expect, sadly. No AutoCAD 2012 CHM was provided with the product at launch time, or even later as a download.

So how well did this new and improved attempt at on-line Help go down with the punters? In my poll on the worst AutoCAD features of all time, Help (on line / 2012) came in third, which gives you some idea. Third worst of all time! That’s a really, really bad place to be. There’s only one place to go from there, surely?

With AutoCAD 2013, Autodesk has wrought a miracle, taking this terrible failure of a system and completely revamping it. Somehow, incredibly, impossibly, Autodesk has managed to make it even worse. Not slightly worse, either. Much worse. AutoCAD Help has been plucked from the depths of mediocrity and plunged deeper still, to a dark place where the pressure of awfulness is so great that spontaneous implosion is a real risk.

Enough rhetoric, what’s actually wrong with it?

  1. It’s online by default. That means it’s slow and can’t possibly be 100% reliable. This is an example of Autodesk pushing its ‘vision’ at the expense of the practical needs of its customers. Nothing new there, then.
  2. Like many of Autodesk software’s attempts to access the Internet, it has been written poorly, such that it attempts to access IPs directly instead of using calls that will work correctly through a proxy server with firewall. As a result, it fails completely in some secure corporate environments. Mine, for example.
  3. Never mind, let’s just go and tell it to use the offline version instead. Turn off the Options > System > Help and Welcome Screen > Access online content when available toggle, hit F1 and see what happens. This does:
    What? You mean it’s not already installed? I have to download and install it separately myself? To be fair, during installation, you are kind of warned about this with a little information glyph. Hover over it and you will see this:OK, for an individual user that’s a drag, but for a CAD Manager with a large number of computers to set up, that’s way beyond inconvenient. Not to mention a user that’s in a location where online access is expensive, intermittent and/or absent. It would not have been at all hard to include offline Help in a 2013 install, and the fact that a deliberate decision was made to not do so smacks of arrogance. Assuming this worked properly, this situation would reflect pretty badly on Autodesk. But it’s worse than that; read on.
  4. Once the offline Help has been downloaded and installed, let’s try hitting F1 again.  This is what I saw:A little investigative work proved that the Help files were not located in the C:\Program Files\Autodesk\AutoCAD 2013\Help location, but rather in C:\Program Files\Autodesk\AutoCAD 2013 Help\English\Help. That’s right, Autodesk requires you to perform two installations, one of which apparently places files in a different location from that in which the other will go looking. Luckily, instead of going round moving files or changing settings, I just restarted AutoCAD and the problem went away. It’s quite possible I would never have seen the problem if I had done the second installation while AutoCAD wasn’t running, but it’s quite likely that many users will download and install in exactly that situation. The result is confusion, the impression given is amateurish.
  5. When you finally do get to get something other than error messages, this is it:Where’s the User Guide? Command Reference? Customization Guide? Gone. There’s no structure to it. It’s basically just a huge mass of web pages you’re expected to search through. There is no index, no contents, no list of commands, nothing. You want to find Help on something, you go search for it. Not sure exactly what the name is of the feature or command you’re searching for? Bad luck.
  6. You know what Autodesk’s search mechanisms are like, right? Yes, this one sucks too. Beginner? Want to draw a line? In AutoCAD 2010, in the Index tab, start typing LINE and the item appears at the top of the list. Double-click it and you’re there. In AutoCAD 2013, enter LINE in the search box, pick the button and this is what you see:

    So where’s the LINE command? It’s not even on the first page of results. You need to scroll down to find it. No, I’m not kidding. To add insult to injury, unlike every other Windows scroll bar I’ve seen, the one in the search results panel doesn’t page down when you click under the button, it just scrolls a single line at a time. It was probably pretty hard to program it to do that.
  7. Once you’ve got to a page and you want to get around a bit, usability is poor. By default, the search item is highlighted so the title of the LINE page, for example, will display as white on a yellow background. Very readable. There is a general lack of controls, and navigation is awkward and slow. Without a hierarchical structure and no breadcrumb feature, it’s difficult to get an idea where you are and what subjects might also be useful to look at. The tabs that we had in 2010 are gone. There are links to related references and concepts, but they’re at the bottom of each page. If you can see that the page you’re in is not useful to you, you have a bunch of scrolling to before you get to those links. The back and forward buttons on my mouse don’t work here, although they work fine everywhere else.

I could go on and on with the faults, but this post is already a monster so I’ll stop there. It’s difficult to think of ways in which this could have been done worse, but I’m sure Autodesk is working on it for 2014. Seriously, this is just embarrassing.

Autodesk, it’s not as if your software is cheap or sells in tiny quantities. You’re not short of the resources you need to do a good job, yet your AutoCAD Help system is so ridiculously inferior to that of numerous freeware and shareware applications that it’s not funny. What on earth were you thinking when you spewed out this rubbish? Did you think we wouldn’t notice?

You obviously want to convince your customer base that you’re all on-line trendy and capable of providing great Internet-based solutions that will have people flocking to use your Cloud stuff. OK, start by getting your finger out and making this stuff work. After three releases, you can’t do an acceptable job at something so seemingly tailor-made for online use as a bunch of text, images and video (which pretty much describes the World Wide Web). What kind of job can you be trusted to do with something much more difficult, such as CAD on the Cloud?

AutoCAD 2013 – Download from Subscription without Akamai

3 Replies

Edit (October 2016): see this post to download Autodesk software easily.

This year, Autodesk appears to have finally got its act together in terms of making software downloads and serial numbers available to Subscription customers quickly after the AutoCAD release. For me at least, the serial numbers and downloads were available as soon as I looked for them, so Autodesk deserves praise for improving matters considerably when compared with the last couple of years.

If you’re a Subscription customer about to download AutoCAD 2013, you may be wondering how you can avoid the awful Akamai Download Manager. If you go to the download page, scroll through the various languages and find the product you’re interested in, you will see a Download Now button. Do not click it, because that will trigger an Akamai infestation. Instead, click on the down arrow to the right of the button. That will give you the option of performing a Browser Download. Click that and away you go.

Subscription Download

The download sizes listed on the site are nearly double the real size of the downloaded files. The 32-bit version is actually 0.98 GB, not 1.89 GB. When you run the executable, it will unzip itself to expand to that size, but that’s not the size you need to know about when you’re downloading something.

In my case, the download happened at rather less than half the speed at which the trial came down (taking over 30 minutes for the 32-bit version rather than 13 minutes), but that’s not a valid comparison as I used a different Internet connection and a different browser. The file I downloaded from Subscription was byte-for-byte identical to the equivalent file downloaded as a trial.

AutoCAD 2013 – Download the trial without Akamai

20 Replies

Edit (October 2016): see this post to download Autodesk software easily.

It’s AutoCAD new release time again and many of you will want to get hold of the trial software, or download the production software from the trial site rather than the Subscription site for performance or other reasons (the resultant downloads are identical). As in previous years, Autodesk is heavily pushing the use of the Akamai Download Manager to download it, going to what I consider unethical lengths to do so. For a variety of reasons, some of which I’m not at liberty to discuss and others of which I have already discussed extensively, I strongly recommend not installing this software. In my view, it is a very bad idea to let anything by Akamai anywhere near your computer. If you’re in a secure corporate environment, it’s quite likely that you won’t be able to do so, or if you can, that it won’t work anyway.

Although the Autodesk download process gives every impression that you have no choice in the matter, this is not true. In the past I have had to install an unsupported browser (Opera) to get at a straightforward download link, but this time it is possible to get the software without having to resort to that. Here’s what to do. Go to http://usa.autodesk.com/autocad/trial/, fill in the form and click the Download Now button. You will be presented with this screen:

Avoiding Akamai

This is a pack of lies. Ignore everything except the line that says If you cannot complete the installation, click here. Click that and you will see this:

Avoiding Akamai

The feedback link takes you to Akamai’s site so it’s probably not useful as a mechanism to let Autodesk know what you think of its use of the Akamai Download Manager. I have used it in the past and it’s a black hole, so don’t waste your time there.

As you can see, there may not be an OK button visible, but if you scroll down you will see it. Click it.

Avoiding Akamai

That will get you to this screen:

Avoiding Akamai

More misleading stuff here, but the important thing is the text that says Click here to download using your browser. Click that and you can start actually downloading the installation executable.

The links I eventually got to using this process were:

http://trial.autodesk.com/SWDLDDLM/2013/ACD/ESD/AutoCAD_2013_English_Win_32bit.exe
http://trial.autodesk.com/SWDLDDLM/2013/ACD/ESD/AutoCAD_2013_English_Win_64bit.exe

At home, using Firefox 11.0, each download took just under a quarter of an hour without using any special download manager software. These links may not work for you and your experience may vary depending on your browser, location and language.

Oh, and Autodesk, the 2013 trial download page is still called AutoCAD 2012 – Free Trial – Download AutoCAD Trial – Autodesk and contains a link to the 2012 download FAQ. You might want to change that. You might also want to change the wording on the messages shown above to something less deceptive, especially if you’re interested in how much your customers trust you in future. Finally, I strongly suggest you give up on pushing this Akamai junk. Please.

AutoCAD 2013 – What’s new?

23 Replies

As AutoCAD 2013 (yes, that’s what it’s called, shock, horror!) has now been released in Japan (Google translation), I can start to discuss it. I’m not yet free to go into details about anything that does not have publicly released information avaialable, but here’s a brief summary of what I can say. I will discuss some of these things in more detail later.

  • It has a powerful tool for mosquito aggregation (allows you to effortlessly gather together a Cloud of bugs)

OK, I’m kidding around, that’s just the Google translator struggling a little. Let’s get serious and list some new things that are easy enough to understand from the translation:

  • Command-line options that you can click on (could be good, depends on how it performs)
  • Other command-line changes (you can see in some of the screenshots that the command line now looks very different)
  • Property editing preview (similar to the Microsoft Office feature where you can hover over a user interface element and have the contents dynamically show you the changes before you confirm with a click)
  • Viewport preview of the changes (same kind of thing but with viewport display)
  • View and cross-sectional view detailed diagram (Model Documentation improvements including sections and details)
  • Strikethrough in text, leaders, tables, etc. (some will find this very useful)
  • Inventor file import (again, useful to some if it works well)
  • Latest user templates (updated with new title blocks, styles, etc.)
  • Boundary stretching tool according to the situation (PressPull improvements)
  • Extract the surface dividing line (looks like you can pick a point on a surface and have a line generated on it)
  • More context-sensitive Ribbon tabs have been added
  • Tool palettes can now be migrated (not that I trust Migration with anything)
  • Autodesk Cloud connection (you can export drawings to the Cloud; more on this in later posts)
  • Social media connection (I’m sure you’re all delighted to see Facebook and Twitter incorporated into AutoCAD; this makes perfect sense in a production environment)
  • Windows Vista is no longer supported. You can use XP or Windows 7, but not the OS inbetween.

Here are some things that are not so easy to understand from the translation, so I won’t be commenting on them for now:

  • Customize synchronization and support files
  • Application of AutoCAD Autodesk Exchange

There are also several things listed that are specific to AutoCAD 2013 for Mac. The additional functionality here is because it’s still playing catch-up to fill in some of the many functionality holes, but there are still plenty of obvious holes left (e.g. DCL):

  • Project Manager (the Sheet Set Manager)
  • Multi-Edit Hatch
  • Leader line that is included in the text up to the front
  • PDF underlay

So, AutoCAD users, what do you think? In the days before you were financially press-ganged into Subscription, would you have called this a Compelling Upgrade? The sort of thing you would berate your boss to upgrade to? Anything there reach out and grab you?

Restoring Hatch double-click in AutoCAD 2011

41 Replies

In AutoCAD 2011, the default action when double-clicking on a hatch object is to invoke the Properties palette for that object. In previous releases, it would invoke the Hatch Edit dialog box. In my AutoCAD 2011 – Putting things back to “normal” post, I briefly described how to restore the old double-click action. I have since seen some incorrect advice being given out about how to do this, so this post describes the correct process in full detail.

What to do

  1. Invoke the CUI command.
  2. In the top left pane, find the [+] next to Double Click Actions and left-click on it.
    Double Click Actions
  3. Scroll down that top left pane a little until you can see Hatch.
    Hatch
  4. In the bottom left pane (Command list), click on any command and type H. This should take you down to the Hatch Edit command. If not, just scroll down a little more until you can see it.
    Hatch Edit
  5. Left-click on the Hatch Edit command in the bottom left pane, hold down the mouse button and drag the command up onto the top right pane until it hovers over the Hatch item you exposed in step 3. When the little blue triangle is pointing to Hatch, let go of the mouse button, thereby dropping the Hatch Edit command onto Hatch.
    Drag and Drop
    Hint: you may find that the top left pane scrolls crazily while you attempt this step. Unfortunately, this is a “feature” of the CUI interface. If this happens, keep your mouse button held down and move your cursor up and down in the left pane until the scrolling comes under control and you are hovering over the right spot. You can avoid this if instead of dragging the command directly upwards, you move in a curcuitous route to the left or right, moving on to the top left pane from the side rather than the bottom.
  6. Pick OK and that should be it. Double-click on a hatch object and see what happens.

What not to do

You may see some advice telling you to find the Hatch double-click action (step 3 above) and then edit the macro of the Properties command found therein from “^C^C_properties” to “^C^C_hatchedit”. Do not do this.

Why not to do it

If you edit the macro then try it out, it works fine. Why, then, does it matter which method you use? Because if you edit the macro, you are changing the action that occurs not just for the Hatch double-click, but for every place the Properties command is used. This means it will have undesirable side-effects in many places. For example, double-click on a circle after changing the macro and you will see something like this:
Command: _hatchedit
Selected object must be a hatch object or associative hatch block.
HATCHEDIT does not support old-format non-associative hatch blocks.
Select hatch object:

What to do if you’ve already done it

If you have already changed the Properties macro, go back into CUI and reverse the process, changing the macro back to “^C^C_properties” (without the quotes). When you are happy that you’ve fixed that up, use the click-and-drag method described above.

Screen captures created and modified using SnagIt 8 by TechSmith. Disclosure: Shaan Hurley gave me a free copy of this software (and Camtasia Studio 4, and a long-sleeved T-shirt which I promptly ruined by spilling red wine on it) at Autodesk University 2006.