AutoCAD 2009 – How many people really are using the Ribbon?

I was interested to see Shaan Hurley reporting the Ribbon usage figures from the Customer Involvement Program (CIP). Shaan’s figures show Ribbon non-users at 46%, my poll results show it as 71%. Why the discrepancy? Is somebody telling fibs? I don’t think so.

First, blog nauseam poll respondents represent a biased sample, comprising people who are more interested in AutoCAD than average users. Dare I say more knowledgeable? More likely to be power users or CAD Managers, anyway. They are probably more likely than average users to make changes from the default AutoCAD settings. But Shaan’s CIP users are also a biased sample, comprising those AutoCAD users who have CIP turned on. Are users who go with the flow and have CIP on also more likely to go with the flow and leave the Ribbon on? Possibly, but I would have thought the CIP-on bias would be less significant than the blog-reader bias.

Second, Shaan’s sample size is likely to be very substantially larger than mine. I currently get about 5000 unique visitors to this site each month, with only up to about a hundred bothering to respond to a given poll. Shaan’s numbers are likely to be in the hundreds of thousands, and thus much less prone to a few people skewing the results.

Finally, the method of measurement differs. My poll is totally open and transparent, but requires active participation by the respondent. This means that the more strongly you feel about something, the more likely you are to be measured.

Shaan’s measurement method avoids that pitfall. However, because the details of the CIP measurement mechanism aren’t public, its accuracy is open to conjecture. For example, if somebody spends 8 hours working in a Ribbonless session and then tries out the Ribbon in another session for a few minutes, does that count as a score of 1-1, or is the time used taken into account? If somebody works Ribbonless except when using the Block Editor (personally, I think the Ribbon works well there), is a flag raised that says the Ribbon was used during the session? Does that then count as one Ribbon Session and no Ribbonless sessions? (Shaan, you’re very welcome to put that speculation to rest with some details of how it works). In any case, the number of part-time Ribbon users is likely to be small enough not to make a huge difference.

In summary, I’m quite prepared to accept that Shaan’s CIP numbers are likely to be closer to reality than my poll results. I think “about half and half” is a decent compromise answer to the question posed by the title of this post.

The question is, is that a good result? Shaan says he was surprised by the results, but doesn’t state whether he thought the Ribbon would be more or less popular than that. Before I ran my poll, I would have said that a significant minority, say a third of users, were going Ribbonless, and that a good result for the new interface would have been if less than 20% of AutoCAD 2009 users were going out of their way to turn it off. Whichever numbers you choose, the Ribbon is doing a lot worse than that. Why? Please fill in the poll on the right and let us all know. Whatever the reasons, we should be grateful that unlike many software companies, Autodesk has at least given us the choice.

5 thoughts on “AutoCAD 2009 – How many people really are using the Ribbon?

  1. ralphg

    You have to opt into CIP.

    I suspect the 46% figure is of people who use the Ribbon at some point. And it could be early days: people are trying out the ribbon, but haven’t decided whether to keep it turned on.

    Or, they have it turned on, and — like me — don’t use it. (I have the ribobn turned on, because I write AutoCAD documention. But I don’t use it.)

    I use MenuBar to turn on the menu bar.

    Reply
  2. David

    I am not sure the 46% number is accurate, but I think that your 71% number is over inflated because, I think that the majority of the people who responded to your poll are people who don’t like the ribbon as opposed to a more across the board variety of users. I do use the ribbon in a minimize to tabs mode so it doesn’t take up that much space.

    Just my 2 cents.

    Reply
  3. wai

    I dislike ribbon!If they want to use ribbon where is dashboard?No need to change gui but must be add rendering command(eg..lighting effect,light exclude/include/view align for landscape…many..many..)

    Reply
  4. Tatyana

    Thr ribbon eats my spase on screen. Space for drafter the most important thing.I got CAD2009 3 month ago.

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.